Inclines

Post Reply
JoeS-ME
Posts: 2
Joined: Mon Apr 05, 2021 5:04 pm

Inclines

Post by JoeS-ME »

There are several posts on creating inclines but none of them address my problem -- How do you transition from the top of an incline to level track? I'm working in O gauge, 3 rail. When I came down a decent, I was able to slightly bend the rails to transition to the table level but transitioning at the top is a bigger problem. Do I just continue the slope but on a gradually reducing angle until I get to the height I need at the level I need? Thanks in advance.
Post Reply