Walthers Switch machines

Post Reply
msgret219
Posts: 1
Joined: Mon May 03, 2021 2:02 am

Walthers Switch machines

Post by msgret219 »

Does anyone know how to connect signals to walthers switch machines. I contacted walthers and they didn't know. I just want to connect a red/green three wire signal to the switch machine to indicate go or no go for the train depending on the position of the switch.
bsuarez
Posts: 30
Joined: Sat Mar 06, 2021 9:28 am

Re: Walthers Switch machines

Post by bsuarez »

I connected Evemodel JTD21 dwarf signals to the aux fascia output pins and mounted the signals on the mainline on the backside of the switches to indicate point position for an oncoming train. They work very well.

These are the ones I used: https://smile.amazon.com/gp/product/B07 ... UTF8&psc=1

I have a video file I can send you if you want to see them in action.

My email is: wsuarez@wsuarez.com
Quester
Posts: 1
Joined: Sat Jul 24, 2021 11:12 am

Re: Walthers Switch machines

Post by Quester »

Thanks for the link, hard to beat the price.
Post Reply